Paradyne 9161 Reference Manual page 207

MIB Descriptions
B-26
Object Description
rs232PortInSpeed Contains the port's input
(rs232PortEntry 5 ) speed in bits per second.
rs232PortOut Contains the port's output
Speed speed in bits per second.
(rs232PortEntry 6 )
rs232PortInFlow Contains the port's type of
Type input flow control.
(rs232PortEntry 7 )
rs232PortOutFlow Contains the port's type of
Type output flow control.
(rs232PortEntry 8 )
September 1997
Setting/Contents
Speed of the synchronous data port
is determined by the channel
configuration. This object is
supported as read-only and cannot
be changed.
Speeds available for the COM port:
9600, 14,400, 19,200, 28,800,
38,400, 57,600, and 115,200.
Speed of the synchronous data port
is determined by the channel
configuration and cannot be changed
through this object.
Speeds available for the COM port:
9600, 14,400, 19,200, 28,800,
38,400, 57,600 and 115,200.
Supports the following values:
none(1) – No flow control.
ctsRts(2) – Indicates that CTS is
being used for flow control. Also
indicates that both CTS and DTR
are being used for flow control.
dsrDtr(3) – Only DTR is being
used for flow control.
NOTE: The above settings are
mutually exclusive.
There is no way to set
the value "Both", to
ignore both control
leads. If "Both" is the
current setting in the
unit, the value returned
for this object is
ctsRts(2).
none(1) – No flow control.
9161-A2-GH30-20