Udp Group; Transmission Group; Snmp Group - Paradyne 9161 Reference Manual

UDP Group

Transmission Group

SNMP Group

9161-A2-GH30-20
The UDP Group objects are fully supported.
Objects in the Transmission Group are supported on the network and DSX-1 T1
interfaces, the voice ports, the synchronous data ports, and the COM port. These
objects are not defined within MIB II, but rather through other Internet-standard
MIB definitions. The following table provides clarification for objects contained in
the Transmission group when it is not clear how the object definition is supported
by the unit.
Object Description
ds1 Supported on the T1 interfaces. Defined by the DS1 MIB.
( transmission 18 )
rs232 Supported on the synchronous data ports and COM port.
(transmission 33 ) Defined by the RS-232-like MIB.
The SNMP Group objects that apply to a management agent are fully supported.
The following objects apply only to an NMS and return a zero value if accessed.
snmpInTooBig (snmp 8)
snmpInNoSuchNames (snmp 9)
snmpInBadValues (snmp 10)
snmpInReadOnlys (snmp 11)
snmpInGenErrs (snmp 12)
snmpInGetResponses (snmp 18)
snmpInTraps (snmp 19)
snmpOutGetRequests (snmp 25)
snmpOutGetNexts (snmp 26)
snmpOutSetRequests (snmp 27)
September 1997
MIB Descriptions
B-17