Paradyne 9161 Reference Manual page 159

Security
6-4
4. Select and set the following configuration options, as appropriate.
To . . .
Disable an async terminal interface
direct connection
Require a user's login ID and
password to access the COM port
Limit the effective access level to
1
Level 2 or lower
Limit the effective access level to
1
Level 3
1
Make sure you have at least one login with Level 1 security set. The effective
access level of the session is the lower of either the level set to access the port
(COM port or Telnet), or the login access level.
NOTE:
Restoring Access to the User Interface
See
inadvertently be locked out.
5. Press Ctrl-a to switch to the screen function key area.
6. To save changes, select Save and press Return.
7. Select the configuration area where you want to save the changes to and
press Return.
Save Configuration To
Customer Configuration 1/Customer Configuration 2]
When Save is complete, Command Complete appears at the bottom of the
screen.
Setting Up
Refer to Chapter 4,
configuration options.
September 1997
Set the configuration option . . .
Port Use to Alarms.
Login Required to Enable.
NOTE: User login ID and password
combinations must be defined.
Refer to
page 6-1.
Port Access Level to Level-2.
Port Access Level to Level-3.
in Chapter 5, should you
[Current Configuration/
, for more information about Communication Port
Creating a Login on
9161-A2-GH30-20