SNMP Traps
This section describes the T1 access unit's compliance with SNMP format
standards and with its special operational trap features. The T1 access unit
supports the following user interface traps, along with several enterprise-specific
traps:
These traps are listed in alphabetical order within each table.
Trap: warmStart
9161-A2-GH30-20
warmStart
authenticationFailure
linkUp
linkDown
Trap
What It Indicates
warmStart
T1 access unit has just
reinitialized and stabilized
itself.
September 1997
C
Possible Cause
Reset command sent.
Power disruption.
C-1