MIB Descriptions
Device Security, attp-security, (attp-common 8)
Device Traps, attp-traps, (attp-common 9)
Device Control, attp-control, (attp-common 10)
Device Health and Status, devStatus (attp-devStatus)
B-32
The Device Security table (devSecurity.mib) is used to control the number of
SNMP managers that may access the unit, as well as the access level (read or
read/write). This object is fully supported.
The Device Traps table (devTrapMgr.mib) is used to manage the SNMP
managers that the unit reports traps to. This object is fully supported.
The devControl object (devControl.mib) is used to cause a reset of the device
and perform a lamp test. This object is fully supported.
The devStatus object (devHealthAndStatus.mib) is used to report the health and
status messages and self-test result messages from the device. This object is
fully supported.
September 1997
9161-A2-GH30-20