Configuring Local Management Control; Overview - Paradyne 9161 Reference Manual

Management and IP Addressing

Overview

Configuring Local Management Control

9161-A2-GH30-20
This chapter provides the steps needed to provide management connectivity to
the T1 access unit. You need to select and configure:
A method of local management connectivity for T1 access units.
A method for end-to-end management connectivity across the network.
An IP addressing scheme that fits the local and end-to-end management
connectivity methods.
When managing the T1 access unit locally, you can establish a management link
in one of two ways. You can:
Create a management link directly connected through the COM port.
Connect through an external device (modem, LAN adapter, etc.) to the COM
port.
September 1997
2
2-1