Mib Ii Descriptions, Rfc 1213 - Paradyne 9161 Reference Manual

MIB Descriptions

MIB II Descriptions, RFC 1213

9161-A2-GH30-20
The MIB descriptions listed here provide clarification for the MIB objects when it
is not clear how the object definition in the applicable RFC is related to the unit.
Otherwise, the MIB object is supported as documented in the RFC.
This appendix is organized according to the MIBs supported:
MIB II – RFC 1213 and RFC 1573
DS1/E1 MIB – RFC 1406
RS-232-Like MIB – RFC 1659
Enterprise MIB
The unit supports the following MIB II ( Management Information Base) object
groups as defined in RFC 1213:
System group
Interfaces group – Supported for the network T1 interface, DSX-1 interface,
synchronous data ports, and the COM port. The Evolution of the Interfaces
Group of MIB II (RFC 1573) is also supported by the unit. Interface statistics
apply to the COM port only.
IP ( Internet Protocol ) group
ICMP ( Internet Control Management Protocol ) group
TCP ( Transmission Control Protocol ) group
UDP ( User Datagram Protocol ) group
Transmission group
Supported on the synchronous data ports using the RS-232-like MIB.
Supported on the COM port using the RS-232-like MIB.
SNMP ( Simple Network Management Protocol ) group
September 1997
– Supported on the T1 interfaces using the DS1/E1 MIB.
B
B-1