MIB Descriptions
DS1/E1 MIB Descriptions, RFC 1406
Near End Group, DS1/E1 MIB
DS1 Configuration Table
B-18
The ds1 object defined by RFC 1406 is supported for both the network and
DSX-1 T1 interfaces. The DS1 Near End group and DS1 Fractional group is
supported for both interfaces. The DS1 Far End group is not supported.
The DS1 Near End group consists of following tables:
DS1 Configuration
DS1 Current
DS1 Interval
DS1 Total
All four tables support the network T1 interface. Since statistics are not kept for
the DSX-1 T1 interface, only the DS1 Configuration table is fully supported for the
DSX-1 T1 interface. The following table provides clarification for objects
contained in the Near End group when it is not clear how the object definition is
supported by the unit.
Object
Description
dsx1TimeElapsed
Applicable to the network
( dsx1ConfigEntry 3 )
T1 interface only.
dsx1ValidIntervals
Applicable to the network
(dsx1ConfigEntry 4)
T1 interface only.
dsx1LineType
Corresponds to the Line
(dsx1ConfigEntry 5 )
Framing configuration
options for the T1
interfaces on the unit.
dsx1LineCoding
Corresponds to the Line
(dsx1ConfigEntry 6 )
Coding Format
configuration options for the
T1 interfaces on the unit.
September 1997
Setting/Contents
Supports only the following
values:
dsxESF(2) – Indicates ESF
framing.
dsx1D4(3) – Indicates D4
framing.
Supports only the following
values:
dsx1B8ZS(2) – Indicates
B8ZS line coding.
dsx1AMI(5) – Indicates AMI
line coding.
9161-A2-GH30-20