Paradyne 9161 Reference Manual page 169

Menus and Configuration Worksheets
A-4
Device Name: ___________________________________________________________
Network
Configuration Option
1
Interface Status
Line Framing Format
Line Coding Format
Line Build Out (LBO)
Bit Stuffing
Network Initiated LLB
Network Initiated PLB
2
Transmit Timing
ANSI Performance Report
Messages
Management Link
3
IP Address
Subnet Mask
Routing Information Protocol
Network Time Slot
Circuit Identifier
Loss of Signal (LOS) Alarm
Out of Frame (OOF) Alarm
Alarm Indication Signal (AIS) Alarm
Yellow Alarm
Excessive Error Rate (EER) Alarm
Excessive Error Rate Threshold
1
Read-only when Network is set to 1.
2
This first byte cannot be set to 0 nor 127. However, the null address of 0.0.0 is valid
after performing a Clear.
3
Only shown when 9261 Dual T1 NAM is being used.
September 1997
See Table 4-1
Settings
Enable, [Disable]
D4, [ESF]
AMI, [B8ZS]
[0.0], –7.5, –15, –22.5
[62411], Part68, Disable
[Enable], Disable
[Enable], Disable
[System], Network
Enable, [Disable]
[Disable], FDL, DDL
[000.000.000.000] – 223.255.255.255, Clear
[000.000.000.000] – 255.255.255.255, Clear
None, [Proprietary]
01 – 24 [lowest available time slot]
Text field
[Enable], Disable
[Enable], Disable
[Enable], Disable
[Enable], Disable
[Enable], Disable
[10E-4], 10E-5, 10E-6, 10E-7, 10E-8, 10E-9
Default in [Bold]
9161-A2-GH30-20