Paradyne 9161 Reference Manual page 165

Security
6-10
4. Select and set the following configuration options, as appropriate.
To . . .
Enable IP address checking
Specify the number (between 1 and 10) of
SNMP management systems that are
authorized to send SNMP messages to the
access unit
Specify the IP address(es) that identifies
the SNMP manager(s) authorized to send
SNMP messages to the access unit
Specify the access allowed for an
authorized NMS when IP address validates
is performed
5. Press Ctrl-a to switch to the screen function key area.
6. To save changes, select Save and press Return.
7. Select the configuration area where you want to save the changes to and
press Return.
Save Configuration To
Customer Configuration 1/Customer Configuration 2]
When Save is complete, Command Complete appears at the bottom of the
screen.
Refer to Setting Up for SNMP Management
about SNMP configuration options.
September 1997
Set the configuration option . . .
NMS IP Validation to Enable.
Number of Managers to the desired
number.
NMS n IP Address to the appropriate
IP address.
Access Type to Read or Read/Write.
[Current Configuration/
in Chapter 4 for more information
9161-A2-GH30-20