Interface Tests - Paradyne 9161 Reference Manual

Troubleshooting and Maintenance

Interface Tests

5-16
To access the . . .
Voice Port tests
Digital Loopback
Analog Loopback
Line Loopback
Test tones
DRS
Quiet
Force Signaling
Monitor Signaling
Lamp test
The interface tests run on the T1 access unit's Network (1 or 2) or DSX-1
interfaces.
Procedure
To start and stop a Line, Payload or Repeater Loopback test:
1. Follow this menu selection sequence to display the Tests screen:
Main Menu Test
2. For Network tests, select the desired Network interface (1 for 9161 NAM, 1 or
2 for 9261 NAM).
For DSX-1 tests, enter the slot and port number of the desired DSX-1
interface.
3. Highlight Start under Command in the selected test's row. Then, press Return
to start the test. This field now displays the word Stop.
4. View the length of time that the test has been running in the Result column.
5. Highlight Stop under Command in the selected test's row. Then, press Return
to stop the test. This field now displays the word Start.
September 1997
Select . . .
Voice Port Tests
Device Tests
[Network Tests/DSX-1 Tests]
9161-A2-GH30-20