Paradyne 9161 Reference Manual page 110

Setting Up
Table 4-14. General SNMP Management Options (2 of 2)
Community Name 2
Possible Settings: ASCII text entry, Clear
Default Setting: blank
Specifies the second of two names that are allowed to access the objects in the unit's
Management Information Base (MIB). The community name must be supplied by an
external SNMP manager whenever the manager tries to access an object in the MIB.
ASCII Text Field – Add or change the community 2 name (maximum 255 characters).
Clear – Clears the Community Name 2 field.
Name 2 Access
Possible Settings: Read, Read/Write
Default Setting: Read
Specifies the type of access allowed for Community Name 2. This is the type of access
allowed for external SNMP managers accessing objects in the MIB using the
Community Name 2 configuration option.
Read – Allows read-only access to the objects in the MIB for the NAM when using the
Community Name 2 configuration option. This includes all objects specified as either
read-only or read/write in the MIB RFCs.
Read/Write – Allows read and write access to the objects in the MIB for the NAM when
using the Community Name 2 configuration option. Allows access for all objects
specified as read/write in the MIB RFCs. However, access for all read-only objects is
specified as read-only.
4-67
9161-A2-GH30-20 September 1997