Controlling External Device Access - Paradyne 9161 Reference Manual

Security

Controlling External Device Access

6-6
The T1 access unit allows you to control whether dial-in access for an external
device (modem) is allowed on the communication port. To connect to an external
device,
Use the appropriate cable to attach to the COM port as defined in
Appendix E, Cables, Connectors, and Pin
Set the modem for DTR Disconnect using the AT command AT\D2.
Use the External Device Options screen to set the necessary configuration
options that allow dial-in access through the COM port.
Procedure
To control dial-in access:
1. Follow this menu selection sequence:
Main Menu Configuration
2. Select the desired configuration area and press Return.
Load Configuration From
Customer Configuration 1/Customer Configuration 2]
3. Follow this menu selection sequence, pressing Return after each selection:
Configuration Edit/Display
(Com Port)
The External Device Options screen appears.
4. Select a setting for the Dial-In Access configuration option.
To . . .
Enable dial-in access
Disable dial-in access
NOTE:
The data that you enter determines which options display and their order.
5. Press Ctrl-a to switch to the screen function key area.
6. To save changes, select Save and press Return.
7. Select the configuration area where you want to save the changes to and
press Return.
Save Configuration To
Customer Configuration 1/Customer Configuration 2]
When Save is complete, Command Complete appears at the bottom of the
screen.
September 1997
Assignments.
[Current Configuration/
User Interface External Device
Set the Dial-In Access configuration option to . . .
Enable.
Disable.
[Current Configuration/
9161-A2-GH30-20