MIB Descriptions
Enterprise MIB
Device Configuration Variable
Object
Description
devConfigAreaCopy A "get" of this object will always return noOp.
g
py
Copy from active area to customer 1 area.
Copy from active area to customer 2 area.
Copy from customer 1 area to active area.
Copy from customer 1 area to customer 2 area.
Copy from customer 2 area to active area.
Copy from customer 2 area to customer 1 area.
Copy from factory area to active area.
Copy from factory area to customer 1 area.
Copy from factory area to customer 2 area.
B-30
The following lists the Enterprise-specific MIB Objects supported by the unit:
Device Configuration Variable
Port Usage Table
Voice Interface Specific Definition
DS1 Interface Configuration Table
DS1 Performance Statistics Group
Synchronous Data Port Configuration
EDL Near-End and Far-End Registers
Channel Configuration
Device Security Table
Device Traps Table
Device Control Object
Device Health and Status
The device configuration MIB (devConfig.mib) provides support for manipulating
configuration areas, as well as device-wide configuration items. It is fully
supported, except for the following limitations to the variable devConfigAreaCopy.
This variable allows the entire contents of one configuration area to be copied
into another configuration area. The unit only supports the following values.
September 1997
Setting/Contents
noOp(1)
active-to-customer1(2)
active-to-customer2(3)
customer1-to-active(4)
customer1-to-customer2(5)
customer2-to-active(6)
customer2-to-customer1(7)
factory1-to-active(8)
factory1-to-customer1(9)
factory1-to-customer2(10)
9161-A2-GH30-20