Extension Cables - Paradyne 9161 Reference Manual

Extension Cables

Extension cables can be ordered for use with the 50-pin FXO, FXS and E&M
Voice APM connectors. They are all straight-through cables (i.e., Pin 1 on the
voice APM side is Pin 1 on the M66 block side of the cable), and they coincide
with the pins on the 50-pin APM connector.
The following table identifies these cables, indicates the voice APM it is used
with, and describes when you might use each:
9161-A2-GH30-20
Extension Cables
Extension Cable Length Voice APM When Used
1 Amphenol plug-to-
3
1 Amphenol plug
cable
(Twisted pair/25-pair:
1-26, 2-27, 3-28 . . .
25-50)
1 Amphenol socket-
25
to-1 Amphenol plug
cable
(Twisted pair/25-pair:
1-26, 2-27, 2-28 . . .
25-50)
3 Amphenol plugs-to-
6
1 Amphenol plug
connector assembly
(Twisted pair: T1-R1
. . .T24-R24, S1-S2)
3 Amphenol plugs-to- 6
4 Amphenol plugs
connector assembly
(Twisted pair: T1-R1
. . .T24-R24,
TR1-RR1 . . .
TR24-RR24,
M1-E1 . . . M24-E24,
SG1-SG1 . . .
SG3-SG3)
September 1997
Cables, Connectors, and Pin Assignments
E&M To connect the voice APM's 50-pin
FXO Amphenol connector to the M66 block.
FXS
When the M66 block is further than five
feet from the APM connector, used as an
extension to the 5-foot cable normally
used.
See FXO/FXS Voice APM Connector
Page E-12 or
Connector
on Page E-13 for pin
assignments.
E&M When the M66 block is further than five
FXO feet from the APM's connector, used as
FXS
an extension to the 5-foot 1 Amphenol
plug-to-1 Amphenol plug cable.
FXO/FXS Voice APM Connector
See
Page E-12 or
Connector
on Page E-13 for pin
assignments.
FXO To condense three voice APMs onto the
FXS single M66 block connector.
Extend the cable using the 25-foot
1 Amphenol socket-to-1 Amphenol
plug 25-pair cable.
See 3 Amphenol Plugs-to-1 Amphenol
Plug Cable
on Page E-17 for pin
assignments.
E&M To consolidate signals from three voice
APMs and segregate four applications
onto four M66 blocks (e.g., all transmit
signals on one block, all receive signals
on a second block, all E&M signals on a
third, and all battery and signal ground
signals on the fourth).
Extend the cable using the 25-foot
1 Amphenol socket-to-1 Amphenol
plug 25-pair cable.
See 3 Amphenol Plugs-to-4 Amphenol
Plugs Cable starting on Page E-19 for
pin assignments.
on
E&M Voice APM
on
E&M Voice APM
E-15