Menus and Configuration Worksheets
A-6
Device Name: ___________________________________________________________
Sync Data Ports
Configuration Option
Slot ss
Port p
Port Status
Port Type
Port Base Rate
Transmit Clock Source
Invert Transmit Clock
Invert Transmit and Received Data
Send All Ones on Data Port Not
Ready
Action on Network Yellow Alarm
Network Initiated Data Channel
Loopback (DCLB)
Port (DTE) Initiated Loopbacks
Embedded Data Link
EDL Management Link
1
IP Address
Subnet Mask
Routing Information Protocol
Near-End Performance Statistics
Far-End Performance Statistics
Out of Frame (OOF) Alarm
Excessive Error Rate (EER) Alarm
Excessive Error Rate Threshold
1
The first byte cannot be set to 0 nor 127. However, the null address of 0.0.0.0 is valid
after performing a Clear.
September 1997
Settings
916x: 01
T1 NAM: 1, 2
Enable, [Disable]
[E530], V.35, RS449, X.21
[Nx64], Nx56
[Internal], External
Enable, [Disable]
Enable, [Disable]
Disable, DTR, RTS, [Both]
None, [Halt]
[Disable], V.54, FT1, Both
[Disable], DTPLB, DCLB, Both
Enable, [Disable]
Enable, [Disable]
[000.000.000.000] - 223.255.255.255, Clear
[000.000.000.000] - 255.255.255.255, Clear
None, [Proprietary]
[Disable], Maintain, Send, Both
[Disable], Maintain
[Enable], Disable
[Enable], Disable
[10E-4], 10E-5, 10E-6, 10E-7, 10E-8, 10E-9
Default in [Bold]
9161-A2-GH30-20