Changing Directory Numbers; Changing Device Name - Paradyne 9161 Reference Manual

Changing Directory Numbers

Changing Device Name

9161-A2-GH30-20
Use the COM Port Call Directories screen to change the phone number
contained in a selected directory. The T1 access unit ships with all directory
phone numbers blank.
Procedure
To change directory phone numbers:
1. Use the following menu selection sequence:
Main Menu Control
2. To select the directory to be changed, press the number of the desired
directory (1 through 5, or A for Alarm) and press Return. The phone number
for that directory appears.
3. Review or change the phone number. Enter a number of up to 40 characters.
Make sure only valid characters are entered when changing the phone
number. Valid characters:
— Numbers 0 – 9
— Lowercase letters a – z
— Uppercase letters A – Z
— Space ( ) character
— ASCII symbols with the exception of the caret ( ^ )
— Control sequence using the caret ( ^ )
4. Press Ctrl-a to switch to the screen function key area.
5. To save changes, select Save and press Return.
When Save is complete, Command Complete appears at the bottom of the
screen.
Use the Device Name screen to change the
Device Name
System Name
System Location
System Contact
Use any ASCII characters. Your entry in each field will overwrite existing
information. Use Clear to erase all characters in the current field.
Main Menu Control
September 1997
Troubleshooting and Maintenance
COM Port Call Directories
Device Name
5-5