Full Adjustment - Canon imagePRESS C7000VP Reference Manual
Hide thumbs
Also See for imagePRESS C7000VP:
- Trouble shooting information (137 pages) ,
- Customer expectation document (54 pages) ,
- Installation manual (38 pages)
Table of Contents
Advertisement
3
Press [Start].
Full Adjustment
The following two types of full gradation adjustments can be made:
■ Scanner + Printer
This gradation adjustment is performed by outputting a test print
and scanning it repeatedly (3 times). Although user operation is
required for scanning the test print, this adjustment takes a
relatively short time to complete, and only three sheets of paper are
consumed.
■ Printer Only
In this gradation adjustment, the output test print is automatically
scanned 5 times. Although user operation is not required in the
process, it takes a longer time compared to selecting [Scanner +
Printer] for gradation adjustment, and five sheets of paper are
consumed.
This section describes the procedures if [Scanner + Printer] is
selected for gradation adjustment. If [Printer Only] is selected,
setting the output test print onto the platen glass is not required.
IMPORTANT
• [Scanner + Printer] can be selected only if you use the optional Color Image
Reader-H1.
• This machine adjusts the toner and print speed according to the paper type.
To make effective adjustments, select the correct paper type.
• Make sure that you place the test prints properly. Accurate recalibrations of
the gradation, density, and colour settings of the machine cannot be made if
the test prints are not scanned correctly.
• It is recommended that you use Canon High Grade (100 g/m
2
*2
(81.4 g/m
)
for a test print. Calibrations are made based on the output test
print. If the paper used for a test print is not one that is specified for test
printing, tone adjustment may not be performed correctly.
*1 For European region; by MONDI BUSINESS Paper Holding.
*2 For Asia-Pacific region.
• When performing full adjustment, three sheets of test print ([Scanner +
Printer] is selected) and five sheets of test print ([Printer Only] is selected)
are output. Make sure that A3 or 11" x 17" paper is loaded into the machine
before starting this procedure.
NOTE
Test prints are not counted as part of the copy or print total page counts.
2
*1
)
or CLC SK
Device Management Settings
A6-64
Advertisement
Table of Contents
