Erasing Irregular Paper Sizes; Standard Local Print Settings - Canon imagePRESS C7000VP Reference Manual

Erasing Irregular Paper Sizes

1
➞ [Common Settings] ➞ [Registering Irregular
Press
Size].
2
Select the size key containing the irregular paper size
settings that you want to erase ➞ press [Erase].
IMPORTANT
Make sure to check the settings first before erasing them.
NOTE
• Size keys that already have settings stored in them are displayed with a
coloured triangle ( ) in the lower right corner of the key.
• If you select a Size key that already has settings stored in it, the settings are
displayed.
• You can erase the settings of the Size keys for [Perfect Binding Finishing
Size] registered by default ([A4], [A5], and [COM]).
3
Press [Yes].
NOTE
Size key names are not erased. For instructions on changing a key name,
see "Naming a Size Key," on p. A4-41.

Standard Local Print Settings

You can set the standard print settings for the machine. The Standard
Local Print Settings are used in the following cases:
• If you print documents stored in inboxes without changing the print settings
• If you merge and print multiple documents stored in an inbox
• If you reset the settings before printing a document that has been sent from
a computer and stored in an inbox
1
➞ [Common Settings] ➞ [Standard Local Print
Press
Settings].
2
Select the desired standard local print settings for each
mode ➞ press [Done].
Details of each item are shown below.
[Paper Select]: Select the paper source.
[Copies]: Set the number of copies from 1 to 9,999 sets.
[Finishing]: Set the type of collating and other Finishing modes.
[2-Sided Print]: Set whether to perform two-sided printing.
[Erase Document After Printing]: Set whether to erase a document from
[Merge Documents]: Set whether to merge documents, if you select multiple
documents that are stored in an inbox for printing.
memory after it prints.
Specifying Common Settings A4-42