IMPORTANT
• Take care when handling the optional equipment that is attached to the
machine. When an optional unit's cover is opened to replace a staple
cartridge, discard punch waste, or clear paper or staple jams, prints may
still be output if other optional units are operating normally, and are not
involved in the paper or staple jam removal procedure.
• This procedure is only required when the optional Saddle Finisher-AB2 is
attached to the machine.
• Before clearing the staple jam, remove all output sheets from the booklet
tray.
NOTE
If a paper jam occurs at the same time as a staple jam, remove the jammed
paper before removing the jammed staples.
1
Open the front cover of the finisher.
2
Pull out the saddle stitcher unit (F-C4).
3
Pull out the staple case from the saddle stitcher unit.
Clearing Staple Jams
A8-104