Checking the Page Counts on a Control Card
You can check the page counts on the control card you are currently
using.
1
Press [System Monitor].
2
Press [Consumables] ➞ [Others] ➞ [Page Count Check].
3
Check the page counts ➞ press [Done] ➞ [Done].
Checking and Printing Counter Information
You can display and print a list of how much paper was used by each
department.
1
➞ [System Settings] ➞ [Dept. ID Management].
Press
2
Press [Page Totals].
3
Check or print the page total count.
The print page totals that belong to print jobs without a Department ID
(left blank) are the number of prints from computers that do not
correspond with a registered Department ID. These prints are referred
to as prints with unknown IDs.
The scan page totals that belong to scan jobs without a Department
ID (left blank) are the number of pages that have been scanned from
computers that do not correspond with a registered Department ID.
The scanned pages from computers are referred to as network scans
with unknown IDs.
Card Reader-C1
A3-62