List Of Error Messages; Self-Diagnostic Display - Canon imagePRESS C7000VP Reference Manual

List of Error Messages

This section explains the various messages that appear on the touch panel
display, along with possible causes and remedies.
For explanations of messages that are not listed here, see the Sending Guide
and Network Guide.

Self-Diagnostic Display

If the machine displays a self-diagnostic error message, follow the
instructions on the touch panel display.
Self-diagnostic error messages appear on the touch panel display at
the following times:
• When scanning or printing cannot be performed because of an operational
error.
• When you need to make a decision or take some action during scanning,
copying, or printing.
• When you need to make a decision or take some action while browsing the
network.
The following is a list of self-diagnostic error messages, along with
their possible causes and remedies.
Load paper.
Cause 1 The machine has run out of paper. No more prints can be made.
Remedy Load paper. (See "Paper Decks," on p. A7-2.)
Cause 2 The paper deck is not correctly inserted.
Remedy Insert the paper deck as far as it will go. (See "Paper Decks,"
on p. A7-2.)
Load A4 size paper.
Cause The optimum paper size selected by the Automatic Paper Selection
mode is not available in the machine.
Remedy 1 Load the indicated paper size into the machine. If you press
message is displayed, prints are made with the currently selected paper
size.
Remedy 2 If the message continues to be displayed even if the indicated paper size
is loaded, set Drawer Eligibility For APS/ADS in Common Settings (from
the Additional Functions screen) for that paper source to 'On'. (See "Auto
Paper Selection/Auto Drawer Switching," on p. A4-24.)
while this

List of Error Messages

A8-107