2
Press the button on the paper deck that you want to adjust,
and pull out the paper deck until it stops. When the inside
lifter automatically descends to the paper loading position,
lift the paper holder plate and remove all of the remaining
paper.
IMPORTANT
If the machine is in the Sleep mode (the touch panel is not displayed, and
only the main power indicator is lit), you may not be able to open the paper
deck. In this case, press the control panel power switch to reactivate the
machine, and then press the open button.
3
Unlock the lever of the size change plate.
4
Load the desired paper to approximately 10 mm in height.
Slide the outer size change plate and inner size change
plate to align them with the desired paper size.
IMPORTANT
• Do not subject the paper holder plate to shock when loading paper into the
paper deck, as this may result in a malfunction or damage to the machine.
• Adjust the guides correctly to avoid causing a paper jam, dirty prints, or
make the inside of the machine dirty.
POD Deck-A1/Secondary POD Deck-A1 (Optional)
A7-18