Number Of Copies/Job Duration Status Display; Setting An Output Tray To Hold Different Paper Sizes - Canon imagePRESS C7000VP Reference Manual

Number of Copies/Job Duration Status Display

If the Number of Copies/Job Duration Status Display mode is set to
'On', the number of copies specified and the approximate time before
the current job completes is displayed in the Job/Print Status Display
Area.
NOTE
• The accuracy of the approximate times displayed in the Job/Print Status
Display Area may vary, depending on the status of the machine.
• The approximate time is not displayed when the job duration time is less
than one minute.
1
➞ [Common Settings] ➞ [Number of Copies/Job
Press
Duration Status Display].
2
Select [On] or [Off] ➞ press [OK].
Setting an Output Tray to Hold Different Paper
Sizes
This mode enables you to select whether to output different paper
sizes to the same output tray.
IMPORTANT
This mode is available only if the optional Finisher-AB1, Saddle
Finisher-AB2, or High Capacity Stacker-C1 is attached to the machine.
1
➞ [Common Settings] ➞ [Different Paper Sizes for
Press
the Output Tray].
2
Select [On] or [Off] ➞ press [OK].
Select [Off] if you want to prevent different paper sizes from being
output to the same output tray.
If Different Paper Sizes for the Output Tray is set to 'Off', and the
message <Remove the paper from the output tray.> is displayed,
printing stops. Remove all of the paper from the output tray, and
printing resumes.
NOTE
Even if Different Paper Sizes for the Output Tray is set to 'Off', different
paper sizes may be output to the same output tray if there is only a small
amount of paper in the paper tray.
Specifying Common Settings A4-46