Canon imagePRESS C7000VP Reference Manual page 284

9
Press [Start Scan].
10
Remove the test print 2 from the platen glass ➞ press [Test
Print 3].
11
Place the output test print 3 on the platen glass.
Place the test print face down on the platen glass, with the black
bands at the back side of the platen glass.
NOTE
If the optional Feeder (DADF-R1) is attached, place the test print face down
and stack approximately 20 sheets of blank paper on top of it for a more
precise gradation adjustment.
12
Press [Start Scan].
13
Remove the test print 3 from the platen glass.
Device Management Settings A6-67