Adjusting The Creep (Displacement) Correction Of A Custom Paper Type - Canon imagePRESS C7000VP Reference Manual

4
Select the paper's finishing type ➞ press [OK].
You can select the finishing type from [Uncoated], [Recycled],
[1-Sided Coated], [2-Sided Coated], [Embossed], [Vellum], [Film/
Transparency], [Label], or [Cotton].
5
Press [Done].
Adjusting the Creep (Displacement)
Correction of a Custom Paper Type
You can set or change the correction width for each page and paper
type when the Booklet mode is set, by using the Creep
(Displacement) Correction of made for custom paper types.
For more information on creep (displacement), see "Booklet Mode,"
on p. B5-18 in the Copying and Mail Box Guide.
IMPORTANT
Only user-registered paper types can be edited.
NOTE
You cannot change the detailed information of paper being used for
copying/printing jobs.
1
➞ [System Settings] ➞ [Paper Type Management
Press
Settings].
2
Select the paper type that you want to edit from the list ➞
press [Details/Edit].
Registering/Editing Custom Paper Types A6-98