Canon imagePRESS C7000VP Reference Manual page 364

5
Lock the lever of the size change plate and fix it.
6
Squeeze the lever on the outer size change plate below.
Without releasing the lever, slide the rear guide to align it
with the desired paper size.
7
Load all remaining paper whose size you want to change
into the paper deck.
CAUTION
When loading paper, take care not to cut your hands on the edges of
the paper.
IMPORTANT
• Do not load paper into the paper deck that has been previously printed onto,
as this may result in a malfunction or damage to the copier. Always use the
stack bypass to feed paper when you want to print onto the back of a sheet
of paper that already has something printed on its front side (2nd side of
2-Sided print).
• Paper which has been rolled or curled must be straightened out prior to use.
• Make sure that the height of the paper stack does not exceed the loading
limit mark ( ) at the back of the paper deck.
• Never place paper or any other items in the empty part of the paper deck
next to the paper stack. Doing so may cause paper jams.
Paper Decks A7-9