Setting the Secure Watermark Mode
You can select whether to set the Secure Watermark function for each print
job from printer drivers. For more information on the Secure Watermark
function, see Chapter 5, "Special Copying and Mail Box Features," in the
Copying and Mail Box Guide.
NOTE
• Secure Watermark Mode is displayed only if the optional Secure Watermark
is activated.
• If both Forced Secure Watermark and Secure Watermark are set at the
same time, Forced Secure Watermark is given priority.
Printer Driver Secure Watermark
If you set the Printer Driver Secure Watermark mode, you can select
whether to set the Secure Watermark function for each job.
1
➞ [System Settings] ➞ [Secure Watermark Mode]
Press
➞ [Printer Driver Secure Watermark].
2
Press [Set].
3
Select the type of secure watermark to embed (Watermark,
Date, Copy Set Numbering, Serial Number, or ID/User
Name).
● If you select [Watermark]:
❑ Select a preset watermark ➞ press [Next].
● If you select [Watermark] ➞ [Create]:
❑ Press [Enter] ➞ enter the desired text ➞ press [OK] ➞ [OK] ➞
[Next].
If you have registered characters in Register Characters for Page
No./Watermark in Common Settings (from the Additional Functions
screen), you can select the characters from the list.
NOTE
For instructions on entering characters, see "Entering Characters from the
Touch Panel Display," on p. A2-20.
Setting the Secure Watermark Mode
A6-58