Placing Originals In The Sadf Tray - Canon imagePRESS C7000VP Reference Manual

Placing Originals in the SADF Tray

To make copies of heavy or lightweight originals, use the SADF tray,
placing your originals one by one.
You can place the following originals into the SADF tray:
• Weight:
2
- 38 to 216 g/m
• Size:
- A3, B4, A4, A4R, B5, B5R, or A5
(A5 originals cannot be placed horizontally. (A5R))
NOTE
If the original has too many pages, use the Job Build mode on the Special
Features screen. (See Chapter 5, "Special Copying and Mail Box
Features," in the Copying and Mail Box Guide or Chapter 4, "Special
Scanning Features," in the Sending Guide.)
1
Open the SADF tray.
2
Adjust the slide guides to fit the size of your original.
3
Place your original one sheet at a time, face down into the
SADF tray, sliding it forward gently as far as it will go.
IMPORTANT
• Make sure to place only one original at a time. If more than one original is
placed at a time, a paper jam may occur.
• If your original is curled, flatten it out as much as possible before placing it
into the SADF tray.
Feeder (DADF-R1) A3-22