Canon imagePRESS C7000VP Reference Manual page 533
Hide thumbs
Also See for imagePRESS C7000VP:
- Trouble shooting information (137 pages) ,
- Customer expectation document (54 pages) ,
- Installation manual (38 pages)
Table of Contents
Advertisement
Add glue to the perfect binding unit.
Cause
There is no glue in the Perfect Binder-B1.
Remedy
Add glue to the Perfect Binder-B1. For more information, see the
instruction manual for the Perfect Binder-B1.
Remove the paper from the perfect binding unit's stacker.
Cause
Output from a previous job remains in the stacker of the Perfect
Binder-B1.
Remedy
Remove the paper in the stacker of the Perfect Binder-B1. For more
information, see the instruction manual for the Perfect Binder-B1.
Insert the perfect binding unit's stacker.
Cause
The stacker of the Perfect Binder-B1 is not inserted.
Remedy
Insert the stacker of the Perfect Binder-B1. For more information, see the
instruction manual for the Perfect Binder-B1.
The Perfect Binder's front covers are open.
Cause
The front covers of the Perfect Binder-B1 are open.
Remedy
Check that the covers of the Perfect Binder-B1 are closed. For more
information, see the instruction manual for the Perfect Binder-B1.
The Perfect Binder's top cover is open.
Cause
The top cover of the Perfect Binder-B1 is open.
Remedy
Check that the top cover of the Perfect Binder-B1 is closed. For more
information, see the instruction manual for the Perfect Binder-B1.
Printing has been canceled because the horizontal length of the perfect binding cover
is too long. Check the spine width and finishing size, then shorten the horizontal
perfect binding cover length.
Cause
The trimming width of the fore edge is over 49.5 mm when you trim with
the Perfect Binding mode.
Trimming Width
(Less than 49.5 mm)
Finishing Size
Fore Edge
Remedy 1
Change the paper for cover with shorter length in order to set the
trimming width less than 49.5 mm. Measure the thickness of the main
document in advance, apply to the following formulas and judge.
(Length of the paper for the cover
2 - Length of the Finishing Size
* Horizontal length to the feeding direction
Remedy 2
Basically, Remedy1 is priority. However, if you have is no cover paper of
other size, change the thickness of the main document to change the
trimming width less than 49.5 mm
- Change the paper for the main document into thick ones.
- Add the number of the page of main document.
However, if the thickness of the main document exceeds 25 mm, since
another error occurs, cautions are required.
*
- Thickness of the main document)/
*
49.5 mm
List of Error Messages
A8-114
Advertisement
Table of Contents
