Left Edge Alignment Adjustment - Canon imagePRESS C7000VP Reference Manual

11
Press [OK].
12
Perform the test print again, and check the location of the
image.
Repeat steps 6 to 11 until the centre line of the register mark aligns
with the lead edge of the paper.
IMPORTANT
When you open the [Image Location Adjustment] screen again after you
close that screen by pressing [OK], the values on screen are returned to [0].
Nevertheless the adjusted value is effective. If you repeat steps, read off the
value of register marks from new test print and input the new value.
13
Press [Done].

Left Edge Alignment Adjustment

This setting enables you to adjust the image location, by checking
whether the register marks on the test print align with the image at the
left edge of the paper toward the feeding direction.
1
➞ [System Settings] ➞ [Paper Type Management
Press
Settings].
2
Select the paper type that you want to edit from the list ➞
press [Details/Edit].
NOTE
• The meanings of the icons that appear on the left side of each custom
paper type are described below:
: Paper that is registered from [Duplicate] or [Paper Database] with
default settings.
: Paper that is registered from [Duplicate] or [Paper Database] with
changed settings.
• You can select a paper type to display from the paper type selection
drop-down list.
- [All]: Displays all paper types.
- [Standard]: Displays only standard paper types.
- [Custom]: Displays only custom paper types.
• You can sort the paper type list by registration date ([Regist.]), name
([Name]), or basis weight ([Weight]) from the Sort List by drop-down list.
Registering/Editing Custom Paper Types A6-109