Adjusting The Machine; Zoom Fine Adjustment; Saddle Stitch Position Adjustment - Canon imagePRESS C7000VP Reference Manual

Adjusting the Machine

This section describes how you can make fine adjustments to the settings of
the machine, such as making a fine adjustment to the printed image and the
page number or watermark position.
It is recommended that you perform an Automatic Gradation Adjustment and
clean the machine regularly.

Zoom Fine Adjustment

When you print a copy or a document from an inbox, a slight
difference in size may occur between the size of the original image,
and the size of the copied/printed image. In this case, you can perform
a fine adjustment to compensate for this difference.
1
➞ [Adjustment/Cleaning] ➞ [Zoom Fine
Press
Adjustment].
2
Press [-] or [+] to adjust the percentage (%) ➞ press [OK].
If you are making an adjustment to either the X (horizontal) or Y
(vertical) direction, press [-] or [+] to enter a value for that direction
only.

Saddle Stitch Position Adjustment

If you are using the Saddle Stitch mode of the optional Saddle
Finisher-AB2, and you notice that the folds of the paper are not
exactly in the middle of the booklet, you can make adjustments to the
saddle stitch position to compensate for this error.
NOTE
The saddle stitch position can only be adjusted if the optional Saddle
Finisher-AB2 is attached.
1
➞ [Adjustment/Cleaning] ➞ [Saddle Stitch
Press
Position Adjustment].
2
Select the paper size for which you want to adjust the
saddle stitch position.
NOTE
Some of the paper sizes displayed may not be available in certain
countries.
3
Press [▼] or [▲] to adjust the saddle stitch position ➞
press [OK].

Adjusting the Machine

A4-57