Card Reader-C1 - Canon imagePRESS C7000VP Reference Manual

Card Reader-C1

If the Card Reader-C1 is attached to the machine, you must insert a control
card to operate it. The Card Reader-C1 performs Department ID Management
by using the control card.
IMPORTANT
• If you are using a login service other than the default authentication, the
Limit Functions mode will not be available.
• If SSO is set as the login service, you cannot use the optional Card
Reader-C1.
• If SDL is set as the login service, enter your card number in the card ID
field. For more information, see the MEAP SMS Administrator Guide.
NOTE
• If the Basic Features screen does not appear on the touch panel display
when the control card is inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted. (For example, cards which are
damaged or cards prohibited from use.)
• Insert a usable control card correctly.
• For instructions on turning the power ON, see "Main Power and Control
Panel Power," on p. A1-7.
• If the Card Reader-C1 is attached, the types of cards shown below can be
used. An optical type card can manage up to 200 departments, and a
magnetic type card can manage up to 1,000 departments.
Magnetic Type Card Optical Type Card

Card Reader-C1

A3-54