Table of Contents
Advertisement
<Adjustment/Maintenance>
All the settings related to adjustment and maintenance are listed with descriptions. Default settings are marked with a
dagger ( ).
<Displ. Timing for Cartridge Prep. Notif.>(P. 192)
<Special Processing>(P. 192)
<Clean Fixing Assembly>(P. 195)
<Displ. Timing for Cartridge Prep. Notif.>
Set the display timing for the message notifying you that the amount remaining in the drum cartridges is low.
<Drum Cartridge>
<Menu>
Cartridge>
<Special Processing>
If the print results on special types of paper are not satisfactory, the following settings may improve the quality of the
printouts.
<Special Printing Mode U>
Sometimes toner appears splattered around text or patterns in a printout. In such cases, setting this to <On>
may improve the quality of the printout.
<Off>
<On>
<Menu>
<On>
●
Setting this to <On> may affect the print quality for some types of paper (especially for lightweight
paper) or in some printing environments (especially in high humidity environments).
●
When you set this to <On>, <Special Printing Mode Q>, <Special Printing Mode R>, and <Special
Printing Mode T> are set to <Off> automatically.
Setting Menu List
<Adjustment/Maintenance>
Enter the cartridge level
<Adjustment/Maintenance>
<Displ. Timing for Cartridge Prep. Notif.>
<Special Processing>
192
27WS-043
<Drum
<Special Printing Mode U>
Advertisement
Table of Contents
