Colour Mismatch Correction; Curl Correction For Each Paper Source - Canon imagePRESS C7000VP Reference Manual

Colour Mismatch Correction

You can automatically correct colour mismatching that occurs in the
output.
1
➞ [Adjustment/Cleaning] ➞ [Auto Color
Press
Mismatch].
2
Press [Start].
NOTE
An error message is displayed if auto colour mismatch correction is
cancelled. In this case, repeat the procedure from step 1.

Curl Correction for Each Paper Source

This mode enables you to adjust the curl correction level of each
paper source.
Curl correction level is constantly adjusted to suit the characteristics of
a paper. However, if the paper curl is not corrected properly, you can
manually adjust the curl correction level to accommodate the
environment and the characteristics of the paper, such as moisture in
the paper.
You can change the level of curl correction to suit the characteristics
of the paper.
Paper curl is negated by adjusting the paper in the opposite direction
that is curled. Make test copies or prints on the paper that you have
adjusted and check the level of curl correction.
CAUTION
Note that this feature may affect paper feeding. Since increasing the
value to a great extent may cause paper jams, adjusting the values in
small increments is recommended.
Adjusting the Machine A4-77