Placing Originals On The Platen Glass - Canon imagePRESS C7000VP Reference Manual

Placing Originals on the Platen Glass

You should use the platen glass when copying bound originals (such
as books and magazines), heavy or lightweight originals, and
transparencies. You should also place originals onto the platen glass
when you want to copy an A3 original with an image that extends all
the way to the edges without the periphery of the original being cut off.
(See Chapter 2, "Introduction to the Copy Functions" or Chapter 4,
"Basic Copying and Mail Box Features," in the Copying and Mail Box
Guide, or Chapter 3, "Basic Scanning Features," in the Sending
Guide.)
NOTE
• The machine automatically detects the size of the following originals: A3,
B4, A4, A4R, B5, B5R, A5, A5R, and B6.
• If the original has too many pages, use the Job Build mode on the Special
Features screen. (See Chapter 5, "Special Copying and Mail Box
Features," in the Copying and Mail Box Guide or Chapter 4, "Special
Scanning Features," in the Sending Guide.)
1
Lift the feeder/platen cover.
IMPORTANT
This machine is equipped with an open/close sensor on the feeder/platen
cover (see circled area in the above illustration). When placing originals on
the platen glass, lift the feeder/platen cover approximately 300 mm so that
the sensor detaches from the feeder/platen cover. If the sensor does not
detach from the feeder/platen cover, the size of the originals may not be
detected correctly.
2
Place your originals face down.
Sensor
Color Image Reader-H1 A3-14