Canon imagePRESS C7000VP Reference Manual page 84

● If the paper you want to specify is already loaded in the stack
bypass:
❑ Press [Paper Select] ➞ [Stack Bypass] ➞ select the paper size and
type loaded in the stack bypass ➞ proceed to step 6.
● If the paper loaded in the stack bypass is not the paper that you
want to specify:
❑ Check to see if any job is reserved. (See "Checking Job Status,"
on p. A5-5.)
If there is a current or reserved job, you can reserve a change of
paper for the stack bypass. (See Chapter 2, "Introduction to the
Copy Functions," in the Copying and Mail Box Guide.)
If there is no reserved job, remove any paper remaining in the stack
bypass ➞ continue the procedure from step 2.
2
Adjust the slide guides to match the size of the paper.
Slide Guide
If you are feeding large size paper, pull out the auxiliary tray.
Auxiliary Tray
Stack Bypass-A1 A3-26