Reversing the Contrast of the Touch Panel
Display
You can reverse the contrast on the touch panel display for better
viewing. The Reversed Display mode reverses the light and dark
areas on the touch panel display. If you find it hard to read what is
being shown on the touch panel display, try using this mode.
1
➞ [Common Settings] ➞ [Reversed Display
Press
(Color)].
2
Select [On] or [Off] ➞ press [OK].
Details of each item are shown below.
[On]: The colours of the touch panel display screen are reversed (i.e., the
areas that are normally light become dark, and the dark areas become
light).
[Off]: The touch panel display screen returns to its default colours.
Alternating the Print Output (Offset Jobs)
The Offset Jobs mode automatically sorts the print output by job when
multiple print jobs are specified. It also ensures that output pages are
always sorted even if you forget to specify a finishing mode.
NOTE
[Offset Jobs] is displayed only if the optional Finisher-AB1 or Saddle
Finisher-AB2 is attached.
1
➞ [Common Settings] ➞ [Offset Jobs].
Press
2
Select [On] or [Off] ➞ press [OK].
Specifying Common Settings
A4-44