Canon imagePRESS C7000VP Reference Manual page 375

NOTE
• If there are instructions on the package of paper about which side of the
paper to load, follow those instructions.
• When paper is loaded into the POD Deck, the side facing down is the one
printed on.
• If problems occur, such as poor print quality or paper jams, try turning the
paper stack over, and reload it. However, you cannot turn the texture paper
and 1-Sided Coated paper over. Change the new paper.
• For more information on the print direction of preprinted paper (paper which
has logos or patterns already printed on it), see "Relationship between
Original Orientation and Preprinted Paper Output Chart," on p. A9-10.
• When loading paper, make sure that the height of the paper stack does not
exceed 20 mm. If the height of the paper stack exceeds 20 mm, the edges
of the paper stack may become curled or creased, and poor print quality
may result.
8
Lower the paper holder plate.
9
Change the paper deck's size plate to match the new paper
size.
POD Deck-A1/Secondary POD Deck-A1 (Optional) A7-20