Inch Entry
Specifying this setting ensures that the key for entering values in
inches is displayed on the various numeric entry screens.
NOTE
Even if Inch Entry is set to 'On', you still have the option to enter
measurements in millimetres by pressing [mm] on the various numeric entry
screens.
1
➞ [Common Settings] ➞ [Inch Entry].
Press
2
Select [On] or [Off] ➞ press [OK].
Auto Paper Selection/Auto Drawer Switching
You can set which paper sources can be used for Automatic Paper
Selection and Auto Drawer Switching. This setting can be made
independently for all functions of the machine, and is especially useful
when you want to use different paper sources for different purposes.
NOTE
Paper sources set to 'On' are used for the following functions:
- APS (Auto Paper Selection): The machine automatically selects the
appropriate paper size (paper source) based on the original's size and
copy ratio settings.
- ADS (Auto Drawer Switching): If a paper source is running out of paper
during a continuous print job, the machine automatically selects another
paper source with the same paper size/type, and begins feeding paper
from that paper source.
Specifying Common Settings
A4-24