Uneven Gloss Correction
When the temperature of the fixing unit rises excessively, uneven
gloss may occur. The Uneven Gloss Correction mode enables you to
reduce the uneven gloss by adjusting the temperature rise level of the
fixing unit.
IMPORTANT
[Uneven Gloss Correction] is displayed only when the settings are made
available by your local authorized Canon dealer. Even if [Uneven Gloss
Correction] is displayed, do not allow anyone to change the settings except
for the system manager. For more information on changing the settings,
contact your local authorized Canon dealer.
1
➞ [System Settings] ➞ [Device Management
Press
Settings] ➞ [Uneven Gloss Correction].
2
Press [-] or [+] to set the level of temperature management
➞ press [OK].
Decrease the value to increase the control over excessive
temperature rise.
NOTE
• Changing the Uneven Gloss Correction may have an effect on the paper
curl. If necessary, adjust the Curl Correction Level in Paper Type
Management Settings in System Settings (from the Additional Functions
screen). (See "Adjusting the Level of Curl Correction of a Custom Paper
Type," on p. A6-101.)
• Decreasing the value requires the machine to take a long time to control the
temperature. This may result in a slight decrease of the machine's
productivity.
Device Management Settings
A6-84