Department Id Management; Flow Of Additional Functions Operations - Canon imagePRESS C7000VP Reference Manual

Department ID Management

This section describes how to change the password and page limit,
and how to check the print totals when the control card is being used.
NOTE
The maximum number of digits that you can register for the password is
seven. If you enter fewer than seven digits, the machine registers the
password with leading zeros.
- Example: If <321> is entered, then <0000321> is registered.

Flow of Additional Functions Operations

This section describes the flow of Additional Functions operations
when the optional Card Reader-C1 is attached.
NOTE
Settings specified from the Additional Functions screen are never changed
when you press .
1
➞ [System Settings].
Press
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
keys) ➞ press
(Log In/Out).
The System Settings screen is displayed.
2
Press [Dept. ID Management].
NOTE
If the desired setting is not displayed, press [ ] or [ ] to scroll to the desired
setting.
- (numeric
Card Reader-C1 A3-56