Image Quality Adjustment Settings; Action Adjustment Settings - Canon imagePRESS V1000 Customer Expectation Document

Canon

15.2 Image Quality Adjustment Settings

The Image Quality Adjustment settings are for customers who want to make fine
adjustments to the printed image. The Image Quality Adjustment settings must be
enabled by a service technician. For more information on specifying the Image
Quality Adjustment settings, see the Operation Information User Manual included
with the machine.
The following settings can be adjusted through the Settings/Registration >
Adjustment/Maintenance > Adjust Image Quality menu:
• Automatic gradation adjustment
• Density correction
• Color mismatch correction
• Zoom fine adjustment
• Color balance
• White gap correction
• Adjust fixing unit temperature
• Uneven gloss correction
• Special smoothing

15.3 Action Adjustment Settings

The Action Adjustment settings are for customers who want to make fine
adjustments to the copy and print finish settings. The Action Adjustment settings
must be enabled by a service technician. For more information on specifying the
Action Adjustment settings, see the Operation Information User Manual included
with the machine.
The following settings can be adjusted through the Settings/Registration >
Adjustment/Maintenance > Adjust Action menu:
• Saddle stitch staple repositioning
• Saddle stitch fold placement
adjustment
• Speed/-precision priority for double
staple
• Perfect binding finishing size fine
adjustment
• Adjusting the paper folding position
• Paper alignment when stapling
• Changing the finisher output priority
settings (thin)
• Change fold/stitch position
Revision 4 imagePRESS V1000 Customer Expectations Document
imagePRESS V1000 Customer Expectations Document
• Adjust gradation during printing
• Shading correction
• Make color more vivid
• Dither settings
• Color cast correction
• Uneven image gloss correction
(duplex)
• Low temperature environment mode
• Adjust drum temperature
• Tail-end toner application correction
• Start key touch recognition delay
• Double staple width adjustment
• Adjusting the trimming width
• Adjusting the amount of glue for
perfect binding
• Curl correction for each paper deck
• Paper alignment on finisher tray A/B
• Switch saddle fold mode
• Color/B&W priority for first print time
Page 118