Remote Ui - Canon imagePRESS C7000VP Reference Manual

Remote UI

You can set whether to enable the Remote UI (User Interface) to operate the
machine and change settings.
NOTE
For more information on the Remote UI, see the Remote UI Guide.
1
➞ [System Settings] ➞ [Remote UI].
Press
2
Select [On] or [Off].
Details of each item are shown below.
[On]: Settings can be specified and the machine can be operated through
the Remote UI.
[Off]: Settings cannot be specified and the machine cannot be operated
through the Remote UI.
● If you select [On]:
❑ Select [On] or [Off] for <Use SSL> ➞ press [OK].
Use SSL (Secure Sockets Layer)
[On]: SSL is used to communicate.
[Off]: SSL is not used to communicate.
● If you select [Off]:
❑ Press [OK].
NOTE
• Before setting <Use SSL> to 'On', it is necessary to set a default key in
Network Settings (from the Additional Functions screen). (See Chapter 3,
"Using a TCP/IP Network," in the Network Guide.)
• The Remote UI is enabled only after you restart the machine (the main
power is turned OFF, and then back ON). For instructions on restarting
(turning the main power OFF, and then back ON) the machine, see "Main
Power and Control Panel Power," on p. A1-7.
• Any changes made to <Use SSL> are also applied to <Use SSL> in <Use
HTTP> in MEAP Settings in System Settings (from the Additional Functions
screen).

Remote UI

A6-17