Table of Contents
Advertisement
3.1 General Inspection
It is recommended to follow the steps below to check the instrument before using this device for the first time.
3.1.1 Check for Damages Caused by Transport
If the packaging carton or the foam plastic cushions are severely damaged, please contact the UNI-T distributor of
this product immediately.
If the instrument is damaged by transport, please keep the package and contact the transport department and the
UNI-T distributor, the distributor will arrange for repairment or replacement.
3.1.2 Check Accessories
UTG1000 accessories are: Power cord, USB data cable, BNC cable (1 meter), and user CD.
If any of the accessories are missing or damaged, please contact UNI-T or local distributors of this product.
3.1.3 Machine Inspection
If the instrument appears to be damaged, not working properly, or has failed the functionality test, please contact
UNI-T or local distributors of this product.
3.2 Handle Adjustment
UTG1000 series handle can be adjusted freely. If the handle position needs to be changed, please hold the handle
UTG1000A Series
Chapter 3 Quick Start
on both sides and pull out, then rotate the handle to the desired
position, as shown in figure 3-1:
Figure 3-1
15
Advertisement
Table of Contents
