Fuel Pressure Test - Ducati 1098 2007 Manual

section
D 5

Fuel pressure test

A
Notes
The on-screen icons used during this procedure are explained in a table at the end of this section.
Before carrying out this procedure, you need to detach the fuel tank-seat–cowling assembly (Sect. E 3) from the motorcycle but
without removing it.
B
Slightly raise the fuel tank and place a pad underneath it so as to be able to access the fittings on the flange.
Remove the fuel feed hose (19).
C
D
Take the fuel pressure pipe test (17) and connect one end (D) to the outlet fitting on the tank and the other end (E) to the fuel
E
feed hose (19) in this way, the fuel pressure can be measured at the test outlet (F).
F
G
Connect the pressure sensor (5) to the test outlet (F) of the pipe (17) to transform the pressure signal into an electrical signal.
H
L
M
N
P
74
Use and maintenance
D
WWW.PlanDeGraissage.ORG
19
E
17
F
5
552.1.039.1A
1098/1098S - M.Y. 2007 - edition 00