Setting A User Account And Password - Fujitsu ORACLE M10-1 Installation Manual

3.
Execute the showpasswordpolicy command, and confirm the settings.
XSCF> showpasswordpolicy
Mindays:
Maxdays:
Warn:
Inactive:
Expiry:
Retry:
Difok:
Minlen:
Dcredit:
Ucredit:
Lcredit:
Ocredit:
Remember:
6.2

Setting a User Account and Password

Set a user account and password appropriate to the use environment, and assign a
user privilege to the user account. Be sure to register at least one user account having
the platadm and useradm user privileges.
1.
Execute the adduser command to add a user account.
The following example specifies jsmith for the user account name. If -u is not
specified, the UID is automatically assigned.
XSCF> adduser jsmith
The following example adds a user account with a UID specified.
XSCF> adduser -u 359 jsmith
2.
Execute the password command, and specify a password.
XSCF> password jsmith
Password:
Retype new password:
passwd: password updated successfully
XSCF>
Note - When a user with the useradm privileges specifies another user's account, the
password can be specified regardless of the set value in the setpasswordpolicy(8) command.
Fujitsu M10-1/SPARC M10-1 Installation Guide ･ March 2019
92
0
60
15
-1
0
3
1
8
2
0
0
0
3