Fujitsu ORACLE M10-1 Installation Manual page 4

Chapter 3 Installing the System 39
Chapter 4 Connecting Cables to the Chassis 71
Chapter 5 Performing an Initial System Diagnosis 79
Fujitsu M10-1/SPARC M10-1 Installation Guide ･ March 2019
iv
2.8.1 Redundant configuration of power supply units 25
2.8.2 Dual power feed 26
2.8.3 Three-phase power feed 26
2.8.4 Uninterruptible power supply (UPS) connection (optional) 27
2.9 Preparing Power Supply Facilities 28
2.9.1 Electrical specifications 28
2.9.2 Power cord specifications 30
2.9.3 Breaker characteristics 30
2.9.4 Grounding requirements 32
2.10 Checking External Interface Port Specifications 32
2.10.1 Network configuration example 35
2.11 Checking the Functions of the Operation Panel 36
3.1 Preparing the Necessary Tools/Information for Installation 39
3.2 Confirming Delivered Components 40
3.2.1 Confirming the delivered components of the SPARC M10-1 40
3.2.2 Confirming the delivered components of the PCI expansion unit
41
3.3 Confirming the Rack 41
3.4 Mounting the Chassis in a Rack 42
3.4.1 Mounting the SPARC M10-1 in a rack 42
3.4.2 Mounting the PCI expansion unit in a rack 48
3.5 Mounting Optional Components 69
3.5.1 Mounting optional components in the SPARC M10-1 69
3.5.2 Mounting optional components in the PCI expansion unit 70
4.1 Connecting Cables to the SPARC M10-1 71
4.2 Connecting Cables to the PCI Expansion Unit 74
5.1 Connecting the System Management Terminal to the Chassis 79
5.2 Turning On the Input Power and Starting the XSCF 80