Fujitsu ORACLE M10-1 Installation Manual page 66

Figure 3-22 Attaching the Type-1 rail: Locations of protrusions
Mounting
area (2U)
For the Type-2 rail
The letter [R] on a side of a rail indicates that the side is the front right side, and
[L] indicates that the side is the front left side.
a. From the rear of the rack, insert the rail protrusion into 1U top in the front
b. Pull out the rail to as far as the depth of the rack.
c. Insert the rail protrusion into 2U top in the rear supporting column of the
d. Secure the rail with one M6 screw to the front supporting column of the rack.
e. Attach the other rail in the same manner.
Fujitsu M10-1/SPARC M10-1 Installation Guide ･ March 2019
56
1U bottom
FRONT
supporting column of the rack.
rack.
The fixing location is 2U bottom.
2U top
1U top
REAR
Mounting
area (2U)