Registering A Cpu Activation Key - Fujitsu ORACLE M10-1 Installation Manual

information.
In the following example, no CPU Activation key has been registered.
In this case, perform the work in
XSCF> showcodactivation
Index
------- ----------- ------
In the following example, a CPU Activation key has already been registered. In
this case, skip the work described in
and go to
XSCF> showcodactivation
Index
------- ----------- ------
6.11.3

Registering a CPU Activation key

CPU Activation keys are provided on the CD-ROM labeled "SPARC M10-1 CPU
Activation" supplied for system deployment. Have the CD-ROM on hand before
registering a CPU Activation key.
The CPU Activation keys are contained in text files in the "ACTIVATION_KEY"
folder on the CD-ROM. A file for registering the keys as a batch (XXXXX_XX.TXT)
and another for registering them one at a time (XXXXX_XX_001.TXT, etc.) are
provided. Use either file according to the situation.
The methods of registering a CPU Activation key with the system are as follows:
specify and register the CPU Activation key file; or copy and paste the CPU
Activation key contents.
How to specify and register the CPU Activation key file
1.
Copy the "ACTIVATION_KEY" contents on the CPU Activation key CD-ROM to
a USB device.
2.
Connect the USB device to the USB connector (where "MAINTENANCE
ONLY" is printed) on the XSCF unit panel (rear panel) of the master XSCF.
3.
Register the CPU Activation key by executing the addcodactivation command
from the storage location of the key.
The following example specifies the "XXXXX_XX.TXT" file on a USB device to
register CPU Activation keys.
Fujitsu M10-1/SPARC M10-1 Installation Guide ･ March 2019
108
Description Count
"6.12 Assigning CPU Core Resources to a Physical
Description Count
0 PROC
"6.11.3 Registering a CPU Activation
"6.11.3 Registering a CPU Activation
2
key."
key"
Partition."